Friday, July 1

Quick guide to know everything you need when choosing support for your monitor or television


One of the most important pieces in a room is the television or, in case there is a desktop or laptop computer from which we work, a monitor. And although it may seem that it is enough to look at which model of device we are going to buy, when choosing any of these devices it is very important to take into account the space that we will dedicate to it in our house.

Four monitors for less than 200 euros to work with the laptop

Know more

If the television is very high or in a position where it forces us to turn sharply, it can cause us back problems. Or if our computer monitor is too low for our eyes or too far or close to us, It will force us to bend our necks.

To solve this problem – which in the long run can turn into neck or back pain – there are different supports to adjust the height and position of these devices to our liking.

First of all: what is VESA

In order to place our television or monitor on any wall or furniture, we will need a VESA mount. But what is this exactly?

VESA refers to the Video Electronics Standards Association, an international organization which tries to promote the standardization of different aspects in technologies from different manufacturers. Despite this, it has spread as the common name for the type of support for monitors and televisions.

Actually, the rule that the rear bracket of these devices is governed by is called FDMI (Flat Display Mounting Interface); this being one of the standards promoted by VESA. In this way, it establishes the VESA MIS system (VESA Mounting Interface Standard) or FDMI MIS, which is basically the name given to the specific measure.

Find out the size of your TV

Once we have established what exactly VESA and FDMI mean, how do I know how large my monitor is?

exist six VESA ratings –Expressed as “VESA MIS” and a letter–: A, B, C; the less common, and D, E, F; the most widespread. Each of the letters indicates a holder for a range of size and weight. For example, the VESA MIS-B (or FDMI MIS-B) rating indicates a 50x20mm distribution between holes, a specific screw size (typically 4x6mm), a 4 to 7.9-inch panel, and a weight up to 2 kg.

As the alphabet progresses, increases media capacity in both inches and weight. In other words, a VESA MIS-F is the base that holds the most weight and size.

Now, how do we find out what VESA support our device needs? Easily, we have to measure the distance between the holes in the back of our monitor or television.

Thus, we will have to locate the threaded holes that are behind the screen (normally, distributed in a quadrangular or rectangular shape) and measure the distance that there is both horizontally and vertically.

If, for example, between the horizontal holes there is a difference of 100 mm and vertically, another 100 mm, we would need a VESA MIS-D mount (equivalent to from 12 to 23.9 inches and up to 14 kilograms of weight). Many times, we can consult the user manual or on the manufacturer’s website the type of support we need.

What monitors / televisions support VESA?

The reality is that the vast majority of manufacturers adhere to this standard. Since the organization’s own website, you can see a complete list of which companies use VESA measurements.

Among them are Sony Corporation, Toshiba, LG, BenQ, TCL, etc. There are also other manufacturers, such as Ozone, which also takes advantage of these measures but does not appear on the list. However, there are other companies that have other systems on their devices.

Although it is strange, it is always advisable to consult the manufacturer’s website before buying a television or monitor, especially if we know that we will need a support.

What is a support for

After reviewing all of the above, what uses can be given to one of these VESA mounts, whether you are looking for one for television or for a monitor? The most common reason is gain space, especially in the case of computer monitors.

Many times, even if we only have one, the base of it can occupy a large part of the surface of the table or, simply, it is very annoying. A support can clear the table and gain a useful area. Another reason is to avoid back and neck pain.

There are times when a monitor can be somewhat low or, on the contrary, something high and this forces us to tilt our head. An “arm” allows us to regulate the height and solve this problem. With the television, the reasons can be the same: both to gain space and greater comfort depending on the viewing angle that we are looking for.

To these above, we must add that using a wall mount for our television allows us to do without a specific piece of furniture to hold it or gain in aesthetics.

Media types

If, after reading the guide, we think we may need one, in ConsumptionClear we have prepared a short list with the types of supports and a recommendation for each:

1. Wall

As their name indicates, they are those that are anchored to the wall. The main advantage of this type of support is that they allow the most space to be optimized, while its main disadvantage is that it requires drilling. Within this type, there are three subcategories:

  • Permanent. They are the simplest supports: they are placed on the wall and the television is screwed, and that’s it. Its name reveals its main characteristic, since it does not allow the television to be moved in any direction.
  • Tilting. A slight evolution of the previous ones, since they have a system to tilt (vertically or horizontally, depending on the model) the device so that it has a certain capacity for adaptation.
  • Arm. The most versatile. Unlike the previous ones, between the support that is placed on the wall and the module to screw the TV there is a mobile arm that usually moves in almost all directions.

Our recommendation: for 39.99 euros, Perlegear support It is one of the best alternatives for those looking to “hang” their television. It is a system with an arm that supports VESA models from 200×100 mm to 600×400 mm; that is, 37 to 75 inches and a weight of 60 kg. By having an arm, and for its price, it is a great option, since it allows us to place the television exactly as we need.

2. Of clamp.

The clamp supports are the alternative without works and without drilling to the previous ones. Instead of being fixed to the wall, they are anchored to a table or furniture through an adjustable clamp. In most cases, it is the right support for monitors, since they are usually on a table.

  • Bar. The bar supports are made up of: a clamp or clamp that adjusts to the table, a vertical bar and “arms” that extend from it. In these “arms” is where the monitors are anchored. The main advantage of this type of support is its price and, in addition, that they are modular, that is, they can be expanded both vertically and horizontally by buying more arms. A disadvantage is that when placed on a table or piece of furniture, there is a risk that the arm will hit the wall and therefore lose mobility. Also, depending on the material, it may shake a lot with any use.
  • Of gas. Like the previous type, these supports are anchored to a table or furniture using a clamp or clamp, but the difference is that they have gas springs to hold the monitor. How does this affect? First of all, these types of mounts hold more weight and larger monitors. Second, they solve the problem of hitting a wall, since it is much more versatile. And lastly, it allows you to adjust the height without the need for an Allen key. The biggest downside? It is a more expensive and larger support, so it affects even more the material of the furniture on which we place it.

Our recommendation: for 36.99 euros, the Huanuo is one of the best supports what’s up. It is a gas base composed of a single arm that has a sergeant or, if we prefer, a system to hold onto the table through a hole.

The measurements that correspond to it are 75-100 mm -75×75, 100×100, etc.-, compatible with monitors between 13 and 27 inches up to 6.5 kg. Its clamp opens from 2 to 9.5 centimeters, so a table wider than this should be discarded.

follow us on instagram

If you don’t want to miss any of our items, subscribe to our newsletters





www.eldiario.es